LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1811 (HVAC System - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new sensor grille to the headliner.
  2. Fig 1: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  3. Install the inside air temperature sensor to the headliner and sensor grille.
  4. Fig 2: Electrical Connector & Inside Air Temperature Sensor
    GM675996Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connector to the inside air temperature sensor.
  6. Install the left sunshade. Refer to Sunshade Replacement .
  7. Install the left center pillar garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement .
  8. Install the left center assist handle. Refer to Roof Rail Rear Assist Handle Replacement .
  9. Install the left windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .