Barometric Pressure (BARO) Sensor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery cover.
Disconnect the negative battery cable.
Remove the plug hole cover.
Remove the battery duct.
Remove in the order indicated in the table.
Install in the reverse order of removal.

Fig 1: Removal Order Table Of Barometric Pressure Sensor
Courtesy of MAZDA MOTORS CORP.

Fig 2: Barometric Pressure Sensor With Torque Specifications
Courtesy of MAZDA MOTORS CORP.