Not Reusing Windshield

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For the areas of the sealant that are difficult to cut, use the SST (piano wire) and follow the procedure under "Reusing Windshield".

Cut out the sealant all around the glass using a sealant remover.
Remove the sealant by pulling it off.
Remove the windshield.

Fig 1: Cutting Sealant All Around Glass Using Sealant Remover
Courtesy of MAZDA MOTORS CORP.