LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 292 (Lighting System) >> Panel Light Control Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Panel Light Control Switch Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Detach the hood release lever from the lower panel. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION )
  3. Remove the front scuff plate. (Driver's side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  4. Remove the front side trim. (Driver's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  5. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  6. Remove the panel light control switch.
  7. Disconnect the panel light control switch connector.
  8. Install in the reverse order of removal.
    Fig 1: Removing/Installing Panel Light Control Switch
    G02567011Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals