Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Using a bent-tip screwdriver or equivalent, pull on one of the open ends of the retaining ring in order to rotate the retaining ring.
Rotate the retaining ring around the quick connector until the retaining ring is out of position and can be completely removed.

Fig 1: Hooking Retaining Ring

Courtesy of GENERAL MOTORS CORP.

Remove the starter/generator control module (SGCM) radiator hose from the SGCM radiator.