Section 506 (Engine Exhaust System): Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Exhaust Manifold Bolt (First Pass) | 15 N.m | 11 lb ft |
| Final Pass | 25 N.m | 18 lb ft |
| Exhaust Manifold Heat Shield Bolt | 9 N.m | 80 lb in |
| Exhaust Manifold Nut | 20 N.m | 15 lb ft |
| Exhaust Muffler Bolt | 50 N.m | 37 lb ft |
| Exhaust Muffler Hanger Nut | 16 N.m | 12 lb ft |
| Exhaust Pipe Brace Lower Bolt | 50 N.m | 37 lb ft |
| Exhaust Pipe Hanger Bolt | 50 N.m | 37 lb ft |
| Ignition Coil Bracket Stud | 12 N.m | 106 lb in |
| Oxygen Sensor | 42 N.m | 30 lb ft |
| Rear Stabilizer Shaft Bracket Bolt | 65 N.m | 49 lb ft |
| Rear Stabilizer Shaft Bracket Nut | 95 N.m | 70 lb ft |
| Secondary Air Injection (AIR) Pipe Bolt | 20 N.m | 15 lb ft |