LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Engine Cooling System) >> Description and Operation >> Cooling System Description and Operation >> Coolant Level Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Coolant Level Control

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The engine cooling system contains an engine coolant level switch to alert the driver in the event of a coolant loss. The powertrain control module (PCM) sends out a coolant loss signal over the coolant level switch signal circuit. When the engine coolant level switch reads a low coolant level in the fill tank, the switch opens. The instrument cluster has an internal logic which displays information on the message center. The logic receives power from the fuse block on 3 individual power circuits; ignition 3 voltage, off/run/crank voltage, and ignition 1 voltage circuit through the body wiring harness junction block. The message center receives it's power from engine wiring harness junction block on the battery positive voltage circuit. Ground is provided by the ground circuits via the body wiring harness junction block and the engine wiring harness junction block. The message center receives the signal from the logic and displays the LOW COOLANT message. The message is a continuous display shown in amber