Steering Wheel Control Switch Assembly Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Steering Wheel Control Switch Assembly Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedure Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the horn switch. Refer to Horn Switch Replacement .
1	Steering Wheel Trim Cover (Qty: 2) Tip: Remove the 4 horn contact screws.
2	Steering Wheel Control Switch Assembly Screw (Qty: 4) Tip: Quantity may vary with vehicle options. DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur.
3	Steering Wheel Control Switch Assembly (Qty: 2) Tip: Quantity may vary with vehicle options. Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.