Installation Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended Cab) or Sunroof Motor/Actuator Replacement (Crew Cab) .
- Connect the electrical connector to the motor/actuator.
- Install the headliner. Refer to Headlining Trim Panel Replacement (Regular Cab) or Headlining Trim Panel Replacement (Extended Cab) or Headlining Trim Panel Replacement (Crew Cab) .
- Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab Existing Motor) or Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab New Motor) or Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab New Motor) or Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab Existing Motor) .
- Verify the operation of the sunroof.