Circuit/System Testing
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify the scan tool Driver Door Switch Memory Recall Switches parameter changes state while pressing the memory 1 switch.
- If the parameter does not change state, perform the Memory Switch component test. If the switch tests normal, replace the driver door switch.
- Verify the scan tool Memory Recall Switches parameter changes state while pressing the memory 2 switch.
- If the parameter does not change state, replace the memory switch.
- Verify the scan tool Memory Recall Switches parameter changes state while pressing the EXIT switch.
- If the parameter does not change state, replace the memory switch.
- If all circuits test normal, replace the memory seat module.