LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (HVAC System - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new sensor grille to the headliner.
  2. Fig 1: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  3. Install the inside air temperature sensor to the headliner and sensor grille.
  4. Fig 2: View Of Inside Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connector to the inside air temperature sensor.
  6. Install the left sunshade. Refer to Sunshade Replacement .
  7. Install the left center pillar garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement .
  8. Install the left center assist handle. Refer to Roof Rail Rear Assist Handle Replacement .
  9. Install the left windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .