Circuit/System Verification

WARNING:

Always perform the High Voltage Disabling procedure prior to servicing any High Voltage component or connection. Personal Protection Equipment (PPE) and proper procedures must be followed.

The High Voltage Disabling procedure will perform the following tasks:

Identify how to disable high voltage.
Identify how to test for the presence of high voltage.
Identify condition under which high voltage is always present and personal protection equipment (PPE) and proper procedures must be followed.

Failure to follow the procedures exactly as written may result in serious injury or death.

IMPORTANT:

Verify the motor connector is securely connected and not loose. Check for any chaffed wire on the wiring harness.

Verify that DTC C056D is not set.

If the DTC is set, replace the PSCM.