LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2013 >> CTS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Diagnostic Information and Procedures >> DTC B3124 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the headline antenna.
  2. Place a valid keyless entry transmitter in the pocket located in the center console.
  3. Ignition ON, verify a test lamp does not illuminate between the signal circuit terminal A and ground.
    • If the test lamp illuminates, test the signal circuit for a short to voltage. If the circuit tests normal, replace the RCDLR.
  4. Connect a DMM, set to capture AC voltage using the MIN MAX function, between the signal circuit terminal A and the low reference circuit terminal B.
  5. Attempt to start the vehicle. Verify the DMM captured an AC voltage signal.
    • If an AC voltage was not captured, test the signal circuit and the low reference circuit for a short to ground or an open/high resistance. If the circuits test normal, replace the RCDLR.
  6. If all circuits test normal, test or replace the headliner antenna.
scientia non olet · About LEMON Manuals