Radio Scan Tool Information
Radio Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| A/C Switch | Inactive | This scan tool displays Active or Inactive. This is the state of the air conditioning switch. |
| AM/FM Button | Off | This scan tool displays On or Off. This is the state of the AM/FM switch. |
| Antenna Module | Disabled | This scan tool displays Enabled or Disabled. This is the state of the antenna module. |
| Audio Select Button | Off | This scan tool displays On or Off. This is the state of the audio select button. |
| Auto. HVAC Button | Inactive | This scan tool displays Active or Inactive. This is the state of the automatic HVAC switch. |
| Aux. Switch | Inactive | This scan tool displays Active or Inactive. This is the state of the auxiliary switch. |
| Auxiliary Audio Input | Not Present | The scan tool displays Present or Not Present. This is the state of the auxiliary audio input. |
| Balance | Varies | The scan tool displays the present audio speaker balance. |
| Bass | Varies | This displays percent. This is the current audio bass percentage. |
| Battery Voltage | Varies | This displays Volts. This is the current battery system voltage. |
| Bench Mode | Inactive | The scan tool displays Active or Inactive. This is the current state of the bench mode. |
| Calibration ID | Varies | The scan tool displays the Calibration ID of the module. |
| CD Button | Off | The scan tool displays On or Off. This is the state of the CD button. |
| CD/Aux Button | Inactive | The scan tool displays Active or Inactive. This is the state of the CD/Aux button. |
| Configuration Button | Inactive | The scan tool displays Active or Inactive. This is the state of the configuration button. |
| Day/Night Button | Inactive | The scan tool displays Active or Inactive. This is the state of the day/night button. |
| Delete Button | Inactive | The scan tool displays Active or Inactive. This is the state of the delete switch. |
| Destination | Inactive | The scan tool displays Active or Inactive. This is the state of the destination. |
| Display Switch | Off | The scan tool displays On or Off. This is the state of the display switch. |
| Driver Heated Seat Sw. | Inactive | The scan tool displays Active or Inactive. This is the current state of the driver heated seat switch. |
| Driver Temp Down Button | Off | The scan tool displays On or Off. This is the state of the driver temperature down switch. |
| Driver Temp Up Button | Off | The scan tool displays On or Off. This is the state of the driver temperature up switch. |
| DRR | Present | The scan tool displays Present or Not Present. This is the state of the DRR. |
| Eject Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the eject switch. |
| Fade | Varies | The scan tool displays the current audio speaker fade. |
| Favorites Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the favorites button. |
| Front Defrost Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the front defrost switch. |
| Hard Disk Drive Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the hard disk drive button. |
| HVAC Fan Down Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the HVAC fan down switch. |
| HVAC Fan Up Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the HVAC fan up switch. |
| Info Button | Off | The scan tool displays On or Off. This is the current state of the information switch. |
| Load Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the load switch. |
| Midrange | Varies | This displays percent. This is the current audio midrange percentage. |
| Mode Down Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the mode down switch. |
| Mode Up Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the mode up switch. |
| Module Information | Varies | The scan tool displays various module information. |
| NAV | Inactive | The scan tool displays Active or Inactive. This is the current state of the navigation system. |
| On/Off Switch | Off or Inactive | The scan tool displays On / Off or Active / Inactive. This is the current state of the on/off switch. |
| Outside Air Mode Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the outside air mode switch. |
| Pass. Heated Seat Sw. | Inactive | The scan tool displays Active or Inactive. This is the current state of the passenger heated seat switch. |
| Pass. HVAC Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the passenger HVAC switch. |
| Passenger Cooled Seat Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the passenger cooled seat switch. |
| Passenger Temp Down Button | Off | The scan tool displays On or Off. This is the current state of the passenger temperature down switch. |
| Passenger Temp Up Button | Off | The scan tool displays On or Off. This is the current state of the passenger temperature up switch. |
| Phone Signal | Present | The scan tool displays Present or Not Present. This is the state of the phone signal. |
| Play/Pause Button | Off | The scan tool displays On or Off. This is the current state of the play/pause switch. |
| Power Mode | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
| Preset 1-6 Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the corresponding preset switch. |
| Rear Defrost Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the rear defrost switch. |
| Recirculation Mode | Inactive | The scan tool displays Active or Inactive. This is the current state of the recirculation mode. |
| Recirculation Switch | Inactive | The scan tool displays Active or Inactive. This is the current state of the recirculation switch. |
| Record Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the record switch. |
| Repeat Button | Off | The scan tool displays On or Off. This is the current state of the repeat switch. |
| Reverse Button | Off | The scan tool displays On or Off. This is the current state of the reverse switch. |
| RSE | Not Present | The scan tool displays Present or Not Present. Present is displayed if rear seat entertainment is available on the vehicle. |
| Seek Down Button | Off | The scan tool displays On or Off. This is the current state of the seek down switch. |
| Seek Up Button | Off | The scan tool displays On or Off. This is the current state of the seek up switch. |
| Select Switch | Off | The scan tool displays On or Off. This is the current state of the select switch. |
| Signal Strength | Varies | This displays dB. This is the signal strength of the radio. |
| Theft Armed | Learned VIN | The scan tool displays Learned or Not Learned. This is the state of the VIN programming in the radio. |
| Theft Lock Status | Inactive | The scan tool displays Active or Inactive. This is the state of the theft lock system. |
| Treble | Varies | The scan tool displays Present or Not Present. This is the state of the video display. |
| Tune Button | Off | The scan tool displays On or Off. This is the current state of the tune switch. |
| Valet Status | Varies | The scan tool displays Active or Inactive. This is the current state of the valet system. |
| VIN Information | Varies | The scan tool displays digits from the vehicles vin number. |
| XM Button | Inactive | The scan tool displays Active or Inactive. This is the current state of the XM switch. |
Radio Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Clear | This command will clear the hard disk drive. |
| Eject | This command will force an ejection of the CD or DVD in the radio. |
| Reset | This command will force a reset of the radio faceplate. |
| Wakeup | This command will force a wakeup of the radio faceplate. |