LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1954 (Vehicle Diagnostic Information - Specifications - Scan Tool Data (2 Of 2)) >> Specifications >> Remote Control Door Lock Receiver Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Control Door Lock Receiver Scan Tool Information

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Remote Control Door Lock Receiver Scan Tool Data Parameters

Parameter Expected Value Definition
Operating Conditions:  Ignition ON
Fob 1 Battery OK The scan tool displays OK or Low. This is the state of the Fob 1 battery.
Fob 1 Function None The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 1 command as monitored by the RCDLR.
Fob 1 Programmed Yes The scan tool displays Yes or No. Yes is displayed if the Fob 1 is programmed into the RCDLR.
Fob 2 Battery OK The scan tool displays OK or Low. This is the state of the Fob 2 battery.
Fob 2 Function None The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 2 command as monitored by the RCDLR.
Fob 2 Programmed Yes The scan tool displays Yes or No. Yes is displayed if the Fob 2 is programmed into the RCDLR.
Fob 3 Battery OK The scan tool displays OK or Low. This is the state of the Fob 3 battery.
Fob 3 Function None The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 3 command as monitored by the RCDLR.
Fob 3 Programmed Yes The scan tool displays Yes or No. Yes is displayed if the Fob 3 is programmed into the RCDLR.
Fob 4 Battery OK The scan tool displays OK or Low. This is the state of the Fob 4 battery.
Fob 4 Function None The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 4 command as monitored by the RCDLR.
Fob 4 Programmed Yes The scan tool displays Yes or No. Yes is displayed if the Fob 4 is programmed into the RCDLR.
Front Placard Varies This displays Counts.
Last Fob Used Varies The scan tool displays None, Fob 1, Fob 2, Fob 3, Fob 4 or Fob 5. This was the last Fob used, as monitored by the RCDLR.
Learn in Progress Yes The scan tool displays Yes or No. This is the status of the key fob.
LF Pressure Sensor Mode Varies The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the left front pressure sensor.
LF Pressure Status Normal The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the left front tire pressure.
LF Tire Press. Sensor Status Normal The scan tool displays Normal or Failed. This is the state of the left front tire pressure sensor.
LF Tire Pressure Varies This displays kPa (psi). This is the amount of pressure in the left front tire.
LF Tire Pressure Sensor Battery Status OK The scan tool displays OK or Low. This is the state of the battery in the left front tire pressure sensor.
LR Pressure Sensor Mode Varies The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the left rear pressure sensor.
LR Pressure Status Normal The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the left rear tire pressure.
LR Tire Press. Sensor Status Normal The scan tool displays Normal or Failed. This is the state of the left rear tire pressure sensor.
LR Tire Pressure Varies This displays kPa (psi). This is the amount of pressure in the left rear tire.
LR Tire Pressure Sensor Battery Status OK The scan tool displays OK or Low. This is the state of the battery in the left rear tire pressure sensor.
Rear Placard Varies This displays Counts.
RF Pressure Sensor Mode Varies The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the right front pressure sensor.
RF Pressure Status Normal The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the right front tire pressure.
RF Tire Press. Sensor Status Normal The scan tool displays Normal or Failed. This is the state of the right front tire pressure sensor.
RF Tire Pressure Varies This displays kPa (psi). This is the amount of pressure in the right front tire.
RF Tire Pressure Sensor Battery Status OK The scan tool displays OK or Low. This is the state of the battery in the right front tire pressure sensor.
RR Pressure Sensor Mode Varies The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the right rear pressure sensor.
RR Pressure Status Normal The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the right rear tire pressure.
RR Tire Press. Sensor Status Normal The scan tool displays Normal or Failed. This is the state of the right rear tire pressure sensor.
RR Tire Pressure Varies This displays kPa (psi). This is the amount of pressure in the right rear tire.
RR Tire Pressure Sensor Battery Status OK The scan tool displays OK or Low. This is the state of the battery in the right rear tire pressure sensor.
Selected Front Tire Type Varies The scan tool displays N/A, P-Metric (S), P-Metric (X), Load Range C, Load Range D or Load Range E. This is the type of front tires used on the vehicle.
Selected Rear Tire Type Varies The scan tool displays N/A, P-Metric (S), P-Metric (X), Load Range C, Load Range D or Load Range E. This is the type of rear tires used on the vehicle.
TPM Indicator/Message Off The scan tool displays On or Off. This is the state of the TPM indicator.
TPM System Enabled Yes The scan tool displays Yes or No. Yes is displayed if the TPM system is enabled.
Remote Control Lock Receiver Scan Tool Output Controls

Scan Tool Output Control Description
Copy and Paste TPM Information This procedure copies existing setup information from the module.
Invalidate All Fobs This program will erase all key fobs from memory and then begin reprogramming.
Next Available Slot This program will add key fobs being programmed to the first open slot available in the module.
Program Key Fob 1
  1. Place module in program mode.
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 2
  1. Place module in program mode.
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 3
  1. Place module in program mode.
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 4
  1. Place module in program mode.
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Tire/Type/Pressure Selection
  1. Select load range from list.
  2. Select recommended front tire pressure.
  3. Select recommended rear tire pressure.
scientia non olet · About LEMON Manuals