Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that DTC P181C, P181D, P181E, P181F, P183A, P183B, P183C, P183D, P183E, P184A, or P184B is not set.
- If any of the DTCs are set, refer to DTC P181C-P181F, P183A-P183E, P184A, or P184B .
- Verify that DTC P1824, P182A, P182B, P182C, P182D, P182E, P182F, P1838, or P1839 is not set.
- If any of the DTCs are set, refer to DTC P1824, P182A-P182F, P1838, or P1839 .
- Verify that DTC P16F4 is not set.
- If the DTC is set, program the hybrid powertrain control module. If the DTC resets, replace the T6 drive motor generator power inverter module.