LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2013 >> Escalade ESV Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1759 (Lighting System) >> Repair Instructions >> Headlamp Control Module Replacement (Escalade PLATINUM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlamp Control Module Replacement (Escalade PLATINUM)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Control Module
GM2039271Courtesy of GENERAL MOTORS CORP.
Headlamp Control Module Replacement (Escalade PLATINUM)

Callout Component Name
Preliminary Procedure 
Remove the headlamp assembly. Refer to Headlamp Replacement (Cadillac Escalade) , Headlamp Replacement (Tahoe, Avalanche) , Headlamp Replacement (Chevrolet Tahoe Two-mode Hybrid) , Headlamp Replacement (Escalade PLATINUM) , Headlamp Replacement (Non HID) , Headlamp Replacement (Yukon) , Headlamp Replacement (GMC Yukon Two-mode Hybrid) .
1 ELC Module Screw (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
Hand tighten the screws evenly after installation of the ELC module to the headlamp connector.
2 ELC Module
TIP:  Pull the module straight from the headlamp connector.