Component Testing
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness at the S38 ignition mode switch.
- With the button released, test for 4.5-5.5 KΩ between the signal terminal 3 and the low reference terminal 7.
- If not within the specified range, replace the S38 ignition mode switch.
- With the button pressed, test for 1-1.5 KΩ between the signal terminal 3 and the low reference terminal 7.
- If not within the specified range, replace the S38 ignition mode switch.