LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2013 >> SRX Performance, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting System) >> Diagnostic Information and Procedures >> DTC B258A >> Component Testing >> Relay Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relay Test

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the KR49 headlamp low beam relay.
  2. Test for 60-180 Ω between terminals 85 and 86.
    • If not within the specified range, replace the KR49 headlamp low beam relay.
  3. Test for infinite resistance between the following terminals:
    • 30 and 86
    • 30 and 87
    • 30 and 85
    • 85 and 87
    • If not the specified value, replace the KR49 headlamp low beam relay.
  4. Install a 15A fused jumper wire between relay terminal 85 and 12 V. Install a jumper wire between relay terminal 86 and ground. Test for less than 2 Ω between terminals 30 and 87.
    • If greater than the specified range, replace the KR49 headlamp low beam relay.