Circuit/System Description

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

The parking assist can be enabled/disabled by pressing the parking assist switch. If the parking assist is enabled, engaging the reverse gear activates the parking assist feature. By subsequently pressing the parking assist switch the parking assist can be disabled.

The indicator in the parking assist switch shows the status of the parking assist. If the lamp is ON, parking assist is enabled.

For vehicles without UGN the indicator and switch are connected to the front and rear parking assist control module and the system operates as a stand-alone feature.

With UGN, the indicator and switch are connected to the active safety control module. The active safety control module received input from several modules including the park assist module to provide additional features. The park assist alerts and DTCs originate from the front and rear parking assist control module with the exception of the indicator DTCs which are set by the active safety control module. There are no switch DTCs for vehicles with the active safety control module.