Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
Side Object Sensing Module Malfunction
- Ignition ON, with a scan tool, clear the DTCs.
- Ignition OFF.
- Wait 60 seconds, then ignition ON and verify the DTC is not reset.
- If the DTC is reset, replace the side object sensor the code set in.
Parking Assist Control Module Malfunction
- Ignition ON, program the control module.
- With a scan tool, clear the DTCs.
- Ignition OFF.
- Wait 60 seconds, then ignition ON and verify the DTC is not reset.
- If the DTC is reset, replace the K41 parking assist control module.