Circuit/System Verification
NOTE:
- DTC P15F6 is an informational DTC.
- Diagnose all other K20 Engine Control Module DTCs prior to DTC P15F6.
- Do not replace the K14 Distance Sensing Cruise Control Module or K20 Engine Control Module if DTC P1553 or P15F6 are stored as history DTCs. This is a known issue that has no impact to system function and does not require any additional repair, programming or module replacement.
- Verify there are no other K20 Engine Control Module or communication DTCs set.
- If a DTC is set
- If a DTC is not set
- Complete the diagnosis by looking for an intermittent serial data circuit fault. Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device
.
- If an intermittent serial data circuit fault is found
Repair as necessary.
- If an intermittent serial circuit fault is not found
- If an intermittent serial data circuit fault is found
- Clear DTCs and operate the vehicle in the conditions that the customer experienced.
- Verify DTC P15F6 does not set.
- If the DTC sets
Replace K14 Distance Sensing Cruise Control Module.
- If the DTC does not set
- If the DTC sets
- All OK.