Memory Seat Control Module Replacement

Fig 1: Memory Seat Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front driver seat. Refer to Front Seat Removal and Installation - Bucket (without HP2) .
1	Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) , Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
2	Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) .
3	Driver Seat Riser Finish Cover Procedure Pull rearward to disengage the cover from the seat riser.
4	Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) .
5	Memory Seat Module Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
6	Memory Seat Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and set-up information.