LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2014 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Wiring Systems And Power Management - Component Connector End Views - 1-2 Shift Solenoid To Drive Motor Battery Control Module (X3)) >> Component Connector End Views >> Camshaft Position (CMP) Sensor (Gas except LU3)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position (CMP) Sensor (Gas except LU3)

WARNING: This page is about a different car, the 2014 GMC Sierra 3500 HD, 2014 GMC Sierra 2500 HD, 2014 Chevrolet Silverado 3500 HD, and 2014 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GM516611Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Camshaft Position Sensor Jumper
  • OEM Connector: 12059595
  • Service Connector: 13585316
  • Description: 3-Way F Metri-Pack 150 Series, Sealed (BK)
Terminal Part Information
  • Terminal/Tray: 12048074/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-14 (GN)
Camshaft Position (CMP) Sensor (Gas except LU3)

Pin Wire Circuit Function
A 0.35 RD 631 5-Volt Reference (L20, LMG or LC9)
0.35 D-BU 6259 5-Volt Reference (LZ1, LY6, L96 or L9H)
B 0.35 PK/BK 632 Low Reference (L20, LMG or LC9)
0.35 BN 6266 Low Reference (LZ1, LY6, L96 or L9H)
C 0.35 BN/WH 633 Camshaft CAM W Signal (L20, LMG or LC9)
0.35 D-BU/WH 6265 Camshaft CAM W Signal (LZ1, LY6, L96 or L9H)