LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2014 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Wiring Systems And Power Management - Component Connector End Views - Fuel Pump/Trailer Brake Control Module To Radio (X1 Without UL5)) >> Component Connector End Views >> Intake Air Temperature Signal Modification Module (LC8)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Air Temperature Signal Modification Module (LC8)

WARNING: This page is about a different car, the 2014 GMC Sierra 3500 HD, 2014 GMC Sierra 2500 HD, 2014 Chevrolet Silverado 3500 HD, and 2014 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GM2268728Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: CNG Harness
  • OEM Connector: 33472-0806
  • Service Connector: 13577527
  • Description: 8-Way F 1.5 Series, Sealed (BK)
Terminal Part Information
  • Pins: 1, 5
  • Terminated Lead: 13575808
  • Release Tool: J-38125-217
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: A/E / A/C

Terminal Part Information
  • Pins: 2,4,8
  • Terminated Lead: Service by Connector Assembly - 13577527
  • Release Tool: J-38125-217
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
Intake Air Temperature Signal Modification Module (LC8)

Pin Wire Circuit Function
1 1 GN - Battery Positive Voltage
2 0.35 GN/WH - CNG Switched 12 Volt Signal
3 - - Not Occupied
4 0.5 TN/RD - IAT Sensor Signal
5 1 BK - Ground
6-7 - - Not Occupied
8 0.5 TN/BK - IAT Sensor Signal
scientia non olet · About LEMON Manuals