Circuit/System Testing
- Ignition ON.
- Verify that DTC C056D or C056E is not set.
- If either DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If none of the DTCs are set
- If either DTC is set
- Replace the K17 Electronic Brake Control Module.
- Verify DTC C1255 or C1256 does not set while operating the vehicle within the Conditions for Running the DTC.
- If either DTC sets
Replace the module that set the DTC
- If none of the DTCs are set
- If either DTC sets
- All OK.