LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2014 >> SRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Parking Brake Control Module Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing ECU, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K83 Park Brake Control Module - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K83 Park Brake Control Module - Setup (OR K83 Park Brake Control Module - Configuration and Setup) and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  6. With a scan tool, perform the Parking Brake Cable Adjuster Enabling procedure. Refer to Parking Brake Cable Adjuster Enabling .
scientia non olet · About LEMON Manuals