Navigation Signal Splitter Replacement

WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Navigation Signal Splitter

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the communication interface module bracket. Refer to Communication Interface Module Bracket Replacement .
1	Navigation Signal Splitter Procedure Disconnect the electrical connections. Slide splitter from retaining tabs on the bracket to remove.

Callout

Component Name

Preliminary Procedure
Remove the communication interface module bracket. Refer to Communication Interface Module Bracket Replacement .

Navigation Signal Splitter

Procedure

Disconnect the electrical connections.
Slide splitter from retaining tabs on the bracket to remove.