Fastener Tightening Specifications
WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Hold Down Retainer Fastener | 10 N.m | 89 lb in |
| Battery Negative Cable to Battery Post Fastener | 4.5 N.m | 40 lb in |
| Battery Negative Cable to Engine Block Fastener | 25 N.m | 18 lb ft |
| Battery Negative Cable to Frame Rail Ground Stud Fastener | 9 N.m | 80 lb in |
| Battery Positive Cable to Battery Post Fastener | 4.5 N.m | 40 lb in |
| Battery Positive Cable to Battery Fuse Block Fastener | 10 N.m | 89 lb in |
| Battery Positive Cable to Generator Fastener | 15 N.m | 11 lb ft |
| Battery Positive Cable to Starter Solenoid Fastener | 9 N.m | 80 lb in |
| Battery Positive Cable Conduit Bracket to Starter Solenoid Fastener (LF3) | 9 N.m | 80 lb in |
| Battery Tray Fastener | 15 N.m | 11 lb ft |
| Body Harness Negative Ground Terminal to Negative Battery Clamp Fastener | 9 N.m | 80 lb in |
| Generator BAT Terminal Fastener | 15 N.m | 11 lb ft |
| Generator Bracket Fastener (LFX) | 58 N.m | 43 lb ft |
| Generator Mounting Fastener | 58 N.m | 43 lb ft |
| Generator Mounting Stud | 9 N.m | 80 lb in |
| Starter Motor Mounting Fastener | 58 N.m | 43 lb ft |
| Starter Heat Shield Fastener | 5 N.m | 44 lb in |