Radio Control Assembly Replacement

WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Control Assembly & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel - center. Refer to Instrument Panel Trim Panel Replacement - Center Remove the instrument panel - right side. Refer to Instrument Panel Trim Panel Replacement - Right Side . Remove the accessory switch. Refer to Accessory Switch Replacement . Remove the hazard warning switch. Refer to Hazard Warning Switch Replacement .
1	Radio Control Fasteners (Qty: 6) CAUTION: Refer to Fastener Caution .
2	Radio Control Assembly Procedure Disconnect the electrical connections. When replacing the radio control assembly, transfer all necessary components. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel - center. Refer to Instrument Panel Trim Panel Replacement - Center
Remove the instrument panel - right side. Refer to Instrument Panel Trim Panel Replacement - Right Side .
Remove the accessory switch. Refer to Accessory Switch Replacement .
Remove the hazard warning switch. Refer to Hazard Warning Switch Replacement .

Radio Control Fasteners (Qty: 6)

CAUTION:

Refer to Fastener Caution .

Radio Control Assembly

Procedure

Disconnect the electrical connections.
When replacing the radio control assembly, transfer all necessary components.
Refer to Control Module References for programming and setup information.