Circuit/System Verification
- Ignition ON, clear the DTCs with a scan tool.
- Operate the vehicle at 64 km/h (40 mph) for 10 min.
- Verify DTC P06AC, P06AD or P06AE is not set.
- If any of the DTCs set
Replace the Q8 Control Solenoid Valve Assembly.
- If none of the DTCs set
- If any of the DTCs set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observe from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Replace the Q8 Control Solenoid Valve Assembly.
- If the DTC does not set
- If the DTC sets
- All OK.