TPMS Reset Procedures: Notes

NOTE: If a tire pressure sensor or the RCDLR is replaced, or if wheels have been rotated, tire pressure sensor must be relearned. The relearn be can be performed using either the keyless entry system, the Driver Information Center (DIC) for vehicles without the UH3 option, or a scan tool. See Using Keyless Entry System, Using Scan Tool, Using Driver Information Center (DIC).

When the tire pressure warning light illuminates and warning message appears, immediately check air pressure of all tires and adjust to the specified pressure. Drive vehicle above 25 mph (40 km/h) for a few minutes. Ensure warning indicators go out.