Pedestrian Impact Detection Module Replacement

Fig 1: Pedestrian Impact Detection Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) compartment assembly. Refer to Instrument Panel Compartment Replacement .
1	Pedestrian Impact Detection Module Bolt/Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Pedestrian Impact Detection Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set up procedures.

Callout

Component Name

Preliminary Procedure
Remove the instrument panel (I/P) compartment assembly. Refer to Instrument Panel Compartment Replacement .

Pedestrian Impact Detection Module Bolt/Screw (Qty: 3)

CAUTION:

Tighten
10 N.m (89 lb in)

Pedestrian Impact Detection Module

Procedure