LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2015 >> CTS V, Automatic Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems (Coupe) >> Repair Instructions >> Auxiliary Body Control Module Programming and Setup >> Enabling the Inclination Sensor - UA2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enabling the Inclination Sensor - UA2

Perform auxiliary BCM special function "Enable inclination sensor".

IMPORTANT:

After programming, perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON, with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
scientia non olet · About LEMON Manuals