LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2015 >> SRX Base, 4D Utility >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L (LFX) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Electrical Terminals
    GM2029362Courtesy of GENERAL MOTORS COMPANY
  1. Push in the electrical terminals (1) and ensure the terminals are secure.
    2. Fig 2: Identifying Locking Tabs
    GM2029355Courtesy of GENERAL MOTORS COMPANY
  2. Carefully insert the level sensor until the locking tabs (1) snap into the locking position.
  3. Install the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement (NT7, NU5) Primary Fuel Tank Module Replacement (NA3, NE9, NF9) Primary Fuel Tank Module Replacement (China) .
scientia non olet · About LEMON Manuals