Removal Procedure
WARNING:
Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
- Use forced air ventilation such as a fan set outside of the trunk.
- Plug or cap any fuel system openings in order to reduce fuel vapor formation.
- Clean up any spilled fuel immediately.
- Avoid sparks and any source of ignition.
- Use signs to alert others in the work area that fuel system work is in process.
- Remove the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement (NT7, NU5) Primary Fuel Tank Module Replacement (NA3, NE9, NF9) Primary Fuel Tank Module Replacement (China) .
- Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.
- Using a small, flat-bladed tool, release the retaining tabs (1) while simultaneously pulling the electrical terminals out of the housing.