Component Testing
- Ignition/Vehicle Off.
- Disconnect the electrical connector:B70 Liftgate Close Switch
- Test for infinite resistance between the test points:Signal terminal 3 & Low Reference terminal 4-Switch Not Pressed
- If less than infinite resistance
Replace the component:B70 Liftgate Close Switch
- If infinite resistance
- If less than infinite resistance
- Test for less than 3 ohm; between the test points:Signal terminal 3 & Low Reference terminal 4-Switch Pressed
- If 3 ohm; or greater
Replace the component:B70 Liftgate Close Switch
- If less than 3 ohm;
- If 3 ohm; or greater
- All OK.