LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2015 >> XTS Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Repair Instructions >> Front Camber Adjustment (GNB)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Camber Adjustment (GNB)

Fig 1: Front Camber Adjustment (GNB)
GM2457354Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Position the vehicle on a suitable alignment rack.
1 Steering Knuckle Camber Adjust Nut (Qty: 2)
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Loosen the steering knuckle camber adjust bolt.
  2. Rotate the upper steering knuckle camber adjust bolt inward or outward to adjust the front camber. Refer to Wheel Alignment Specifications .
  3. DO NOT remove any material from the holes for the adjustment bolts as an alignment aide. If there is difficulty adjusting the camber, check for any excessively worn or damaged suspension components.
  4. Once the camber adjustment is complete, tighten the camber adjust nuts to specification.
  5. Tighten the lower camber adjust nut.
  6. Tighten the upper camber adjust nut.
  7. With the camber within the specifications, adjust the toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .

Tighten 
  • Lower camber adjust nut:
    • First Pass: 115 N.m (85 lb ft)
    • Final Pass: plus 45 degrees
  • Upper camber adjust nut:
    • First Pass: 70 N.m (52 lb ft)
    • Final Pass: plus 60 degrees
scientia non olet · About LEMON Manuals