LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2016 >> CTS Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Pedestrian Impact Detection System Disabling and Enabling >> Enabling Procedure - Pedestrian Impact Detection System (PIDS) Fuse
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enabling Procedure - Pedestrian Impact Detection System (PIDS) Fuse

  1. Place the ignition in the OFF position.
  2. Install the fuse supplying power to the PIDS. Refer to Object Detection Schematics or Electrical Center Identification Views .
  3. Turn the ignition switch to the ON position. The PIDS indicator will flash then turn OFF.
  4. Perform the Diagnostic System Check - Vehicle if the PIDS warning indicator does not operate as described. Refer to Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals