Relay Test

Ignition OFF, disconnect the KR2 Headlamp Washer Pump Relay.
Test for 60-200 Ω between terminals 85 and 86.
- If less than 60 or greater than 200
  Replace the KR2 Headlamp Washer Pump Relay.
- If between 60-200 Ω
Test for infinite resistance between the terminals listed below:
- 30 and 86
- 30 and 87
- 30 and 85
- 85 and 87
- If less than infinite resistance
  Replace the KR2 Headlamp Washer Pump Relay.
- If infinite resistance
Install a 10 A fused jumper wire between relay terminal 85 and 12 V. Install a jumper wire between relay terminal 86 and ground.
Test for less than 10 Ω between terminals 30 and 87.
- If 10 Ω or greater
  Replace the KR2 Headlamp Washer Pump Relay.
- If less than 10 Ω
All OK.