LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2016 >> CTS Base, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the EBCM (1) to the BPMV.
    Fig 1: EBCM
    GM3425145Courtesy of GENERAL MOTORS COMPANY
  2. Install the EBCM bolts (1) and tighten to 6 N.m (53 lb in).
    Fig 2: EBCM Bolts
    GM3425144Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Connect the EBCM electrical connector.
  4. Install the windshield washer solvent container filler tube (1). Refer to Windshield Washer Solvent Container Filler Tube Replacement .
    Fig 3: Windshield Washer Solvent Container Filler Tube
    GM3425143Courtesy of GENERAL MOTORS COMPANY
  5. Program the EBCM. Refer to Electronic Brake Control Module Programming And Setup .
scientia non olet · About LEMON Manuals