LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2016 >> CTS Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System - Repair Instructions >> Repair Instructions >> Advance Parking Assist Alarm Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

NOTE: Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative
  1. Insert the sensor into the housing.
    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical connector to the front object alarm sensor.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS) and Front Bumper Fascia Replacement (CTS-V)
scientia non olet · About LEMON Manuals