Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning
.
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution
.
- Turn the ignition OFF.
- Remove the windshield washer solvent container filler tube (1). Refer to Windshield Washer Solvent Container Filler Tube Replacement .
- Thoroughly clean the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) area of any accumulated dirt and debris.
- Disconnect the EBCM electrical connector.
- Remove the EBCM bolts (1).
- Remove the EBCM (1) from the BPMV.
NOTE: Do not pry the components apart.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.