Fuel Pump Power Control Module Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Fuel Pump Power Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (V-Series) and Lifting and Jacking the Vehicle (Base) .
1	Fuel Pump Power Control Module Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Unclip the electrical harness from the fuel pump control module mounting stud. Tighten 9 N.m (80 lb ft)
2	Supercharger Bypass Valve Actuator Procedure Disconnect the electrical connector. If replacing, reprogram the control module. Refer to Service Programming System (SPS)