LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2016 >> CTS Vsport >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K71 Transmission Control Module: Programming and Setup (TL-80SN (MGG)) >> Programming an Existing Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing Control Module

To program an existing control module, perform the following procedure:

  1. Install the special tool: EL-49642  SPS Programming Support Tool
  2. Ignition On/Vehicle in Service Mode.
  3. Access SPS and follow the on-screen instructions for the control module: K71 Transmission Control Module
  4. Perform the SPS function: Reprogram ECU
scientia non olet · About LEMON Manuals