LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2016 >> ELR >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Remove rear bumper fascia. Refer to. Rear Bumper Fascia Removal and Installation
  2. Disconnect electrical from the rear object sensor.
  3. NOTE:

    The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

  4. Lift the locking tabs on the housing and remove the rear object sensor.