Circuit/System Verification

NOTE:

The DTC P0606 can falsely set in K114B Hybrid/EV Powertrain Control Module 2 when disconnecting the 12 V battery. See Diagnostic Aids section for more information.

Vehicle in Service Mode.
Verify DTC P0606 is not set.
- If DTC P0606 is set with other DTCs set
  Diagnose all other DTCs first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If DTC P0606 is set without other DTCs set
  Replace the device that set the DTC.
- If DTC P0606 is not set
Verify DTC P0602 is not set.
- If DTC P0602 is set
1. Program the device that set the DTC.
2. Verify the DTC does not set.
  - If the DTC sets, replace the device that set the DTC.
  - If the DTC does not set
3. All OK.
- If DTC P0602 is not set
Verify DTC P0601, P0603, P0604, P0605, P060A, P062F, or P262B is not set.
- If any of the DTCs are set
  Replace the device that set the DTC.
- If none of the DTCs are set
All OK