Circuit/System Verification
- Ignition ON.
- Verify all scan tool 5V Reference Circuit Status parameters do not display Malfunction.
- If Malfunction is displayed
Refer to Circuit/System Testing.
- If Malfunction is not displayed
- If Malfunction is displayed
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.