Repair Verification
- Ignition OFF, all access doors closed, all vehicle systems OFF, and all keys at least 3 m (9.8 ft) away from vehicle. It may take up to 2 min for all vehicle systems to power down.
- Install any components or connectors that have been removed or replaced during diagnosis.
- Ignition ON.
- Clear the DTCs.
- Verify the A11 Radio scan tool Surrogate MOST Master Node Upstream Position parameter value is None.
- If the value is not None
Disconnect the A11 Radio power or the battery cables for 1 min to reset this value to None.
- If the value is None
- If the value is not None
- All OK.