Circuit/System Verification
- Ignition On/Vehicle in Service Mode.
- Verify the A23C Liftgate Latch Assembly activates and releases the rear compartment lid when pressing the S46B Liftgate Unlatch Switch.NOTE: The keyless entry transmitter must be within 1 m (3 feet) of the rear compartment lid
- If the A23C Liftgate Latch Assembly does not release
Refer to Circuit/System Testing
- If the A23C Liftgate Latch Assembly does release
- If the A23C Liftgate Latch Assembly does not release
- Verify the A23C Liftgate Latch Assembly cinches the rear compartment lid to the fully closed position when gently pushing the rear compartment lid closed.
- If the A23C Liftgate Latch Assembly does not cinch
Refer to Circuit/System Testing
- If the A23C Liftgate Latch Assembly cinch works
- If the A23C Liftgate Latch Assembly does not cinch
- All OK.